+44 (0)1442 353005

Aluminium Ferrules

Aluminium Ferrules

Product Information

All our aluminium ferrules are compliant with DIN EN 13411-3 and are appropriate for rope slings compliant with DIN EN 13414-1.

  • Special Characteristics
  • For ropes with a max tensile strength of 1960 N/mm2
  • Suitable for wire ropes compliant with EN 12385-4
  • Made from seamless tubes to DIN EN 13411-3
  • Available in the sizes 2.5 - 60
  • Available in the sizes 1.0 - 2.0 outside of the standard
  • Finished with cylindrical press dies

Datasheets

  • Splicing Chart

    • Rope Diameter Ø in mm Single Layer Round Strand Ropes Spiral Strands
      (2 Ferrules)
      Nominal Measured Fibre Core & Cable Laid Ropes IWRC & Rotation-Resistant
      Diameter Min Max C ≥ 0.283 C ≤ 0.487 0.487 < C ≤ 0.613 C ≤ 0.613
      2.5 2.5 2.7 2.5 3 - -
      3 2.8 3.2 3 3.5 - -
      3.5 3.3 3.7 3.5 4 - -
      4 3.8 4.3 4 4.5 - 5
      4.5 4.4 4.8 4.5 5 - 6
      5 4.9 5.4 5 6 - 6.5
      6 5.5 6.4 6 6.5 7 7
      6.5 6.5 6.9 6.5 7 8 8
      7 7.0 7.4 7 8 9 9
      8 7.5 8.4 8 9 9-10 10
      9 8.5 9.5 9 10 10-11 11
      10 9.6 10.5 10 11 11-12 12
      11 10.6 11.6 11 12 12-13 13
      12 11.7 12.6 12 13 13-14 14
      13 12.7 13.7 13 14 14-16 16
      14 13.8 14.7 14 16 16-18 18
      16 14.8 16.8 16 18 18-20 20
      18 16.9 18.9 18 20 20-22 22
      20 19.0 21.0 20 22 22-24 24
      22 21.1 23.1 22 24 24-26 26
      24 23.2 25.2 24 26 26-28 28
      26 25.3 27.3 26 28 28-30 30
      28 27.4 29.4 28 30 30-32 32
      30 29.5 31.5 30 32 32-34 34
      32 31.6 33.6 32 34 34-36 36
      34 33.7 35.7 34 36 36-38 38
      36 35.8 37.8 36 38 38-40 40
      38 37.9 39.9 38 40 40-44 44
      40 40.0 42 40 44 48 48
      44 42.1 46.2 44 48 48-52 48
      48 46.3 50.4 48 52 52-56 52
      52 50.5 54.6 52 56 56-60 60
      56 54.7 58.8 56 60 - -
      60 58.9 63.0 60 - - -
  • Aluminium Ferrules Outside of EURONORM

    • Ferrule
      No.
      Rope Diameter Ø in mm Swaging
      Die No.
      Pressed Ferrule
      Diameter Ø in mm
      Fibre Core Steel Core
      Min Max Min Max
      1
      0.9
      1
      0.5
      0.8
      1
      2
      1.5
      1.1
      1.5
      0.9
      1.1
      1.5
      3
      2
      1.6
      2
      1.2
      1.6
      2
      4
  • Pressed Ferrule Dimensions

    • Foarm A and Foarm B - Diagrams
      Ferrule
      No.
      Length Before Swaging Dimension After Swaging
      D1 mm Tolerance mm L1 mm L2 mm
      2.5 9 5 +0.20 12 3.75
      3 11 6 14 4.5
      3.5 13 7 16 5.25
      4 14 8 18 6
      4.5 16 9 20 6.75
      5 18 10 23 7.5
      6 21 12 +0.40 27 9
      6.5 23 13 29 9.75
      7 25 14 32 10.5
      8 28 16 36 12
      9 32 18 40 13.5
      10 35 20 +0.50 45 15
      11 39 22 50 16.5
      12 42 24 54 18
      13 46 26 59 19.5
      14 49 28 +0.70 63 21
      16 56 32 72 24
      18 63 36 +0.90 81 27
      20 70 40 90 30
      22 77 44 99 33
      24 84 48 +1.10 108 36
      26 91 52 117 39
      28 98 56 126 42
      30 105 60 +1.40 135 45
      32 112 64 144 48
      34 119 68 153 51
      36 126 72 +1.60 162 54
      38 133 76 171 57
      40 140 80 180 60
      44 154 88 +1.9 198 66
      48 168 96 216 72
      52 182 104 +2.1 234 78
      56 196 112 +2.3 252 84
      60 210 120 +2.4 270 90

GET IN TOUCH

Downloads

DOWNLOAD OUR BROCHURES

Explore our library of brochures and technical datasheets.


GO TO DOWNLOADS
Email Envelope

TELL US ABOUT YOUR PROJECT

One of our specialists will be in touch to discuss.


SEND ENQUIRY NOW
Telephone with wire

GIVE US A CALL

Speak to one of our specialists about your requirements.


CALL +44 (0)1442 353005