7x19 (12/6/1) - Wire Strand Core Wire Rope Specification

7X19 Wire Strand Core Wire Rope
6x19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7x19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6x19 FC and 6x19 WSC (7x19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys. 7x19 construction is readily available in both galvanised and marine grade stainless steel.
• Industrial door cables
• Garage door cables
• Where cables are required to run over pulleys
• Control cables
• General engineering applications
• Gym equipment cables
• Wind turbine
• Wire rope slings
• Whip checks
• Winch ropes
Breaking Load Table
Nominal Diameter
Approximate Mass
Minimum breaking loads - 1770 Mpa
[mm]
[kg/m]
[kN]
[Kg]
3
0.034 5.77 588
4
0.061 10.25 1,045
5
0.095 16.02 1,633
6
0.137 23.07 2,352
7
0.187 31.40 3,202
8
0.244 41.01 4,182
9
0.309 51.90 5,293
10
0.381 64.07 6,535
11
0.461 77.53 7,908
12
0.549 92.27 9,411
13
0.644 108.29 11,045
14
0.747 125.59 12,809
16
0.975 164.03 16,731
18
1.234 207.60 21,175
20
1.524 256.30 26,142
General Engineering Wire Ropes from SWR
1x19
1x19
6x7 FC
6x7 FC
7x7
7x7
6x19 FC
6x19 FC
7x19
7x19
6x19 Seale FC
6x19 Seale FC
6x19 Seale IWRC
6x19 Seale IWRC
6x19 Filler FC
6x19 Filler IWRC
6x31 IWRC
6x31 FC
6x31 IWRC
6x36 FC
6x36 IWRC
6x37 FC
6x37 IWRC