Steel Wire Rope - Steel Cable - Wire Rope Fittings

7X19 (12/6/1) - Wire Strand Core Specification

6X19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7X19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6X19 FC and 6X19 WSC (7X19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys. 7X19 construction is readily available in both galvanised and marine grade stainless steel.

Industrial door cables
Garage door cables
Where cables are required to run over pulleys
Control cables
General engineering applications
Gym equipment cables
Wind turbine
Wire rope slings
Whip checks
Winch ropes

Nominal Diameter	Approximate Mass	Minimum breaking loads - 1770 Mpa
[mm]	[kg/m]	[kN]
3.0	0.038	5.77
4.0	0.059	10.25
5.0	0.092	16.00
6.0	0.134	23.10
7.0	0.182	31.40
8.0	0.243	41.00
9.0	0.308	51.90
10.0	0.379	64.10
11.0	0.466	77.50
12.0	0.578	92.30
13.0	0.636	108.30
14.0	0.768	125.60
16.0	0.964	164.00
18.0	1.260	207.60
20.0	1.520	256.30

6x7 FC

7x7

6x19 FC

7x19

6x19 Seale FC

6x19 Seale IWRC

6x19 Filler FC

6x19 Filler IWRC

6x31 IWRC

6x36 FC

6x36 IWRC

6x37 FC

6x47 IWRC