Steel Wire Rope - Steel Cable - Wire Rope Fittings

6X36 (14/7+7/7/1) - IWRC Specification

6X36 is a flexible general engineering wire rope readily available in galvanised, unglavanised and marine grade stainless steel. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6X19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6X36 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below:

Wire rope slings
General engineering applications
Crane ropes
Hoist rope
Winch ropes
Holding and closing ropes for grab cranes
Tow ropes
Luffing ropes
Pursing wires
Mooring ropes
Lifeboat falls
Wire rope rigging applications

Nominal Diameter	Approximate Mass	Minimum breaking loads - 1770 Mpa
[mm]	[kg/m]	[kN]
8.0	0.255	40.30
9.0	0.322	51.00
10.0	0.398	63.00
11.0	0.482	76.20
12.0	0.573	90.70
13.0	0.674	106.00
14.0	0.802	124.00
16.0	1.030	161.00
18.0	1.340	204.00
19.0	1.500	228.00
20.0	1.640	252.00
22.0	1.950	305.00
24.0	2.340	363.00
26.0	2.740	426.00
28.0	3.160	494.00
30.0	3.600	567.00
32.0	4.100	645.00
34.0	4.620	728.00
36.0	5.160	817.00
38.0	5.780	910.00
40.0	6.420	1008.00
42.0	7.120	1112.00
44.0	7.830	1220.00

6x7 FC

7x7

6x19 FC

7x19

6x19 Seale FC

6x19 Seale IWRC

6x19 Filler FC

6x19 Filler IWRC

6x31 IWRC

6x36 FC

6x36 IWRC

6x37 FC

6x47 IWRC