Steel Wire Rope - Steel Cable - Wire Rope Fittings

6X19 (12/6/1) - Fibre Core Specification

6X19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7X19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6X19 FC and 6X19 WSC (7X19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys. 7X19 construction is readily available in both galvanised and marine grade stainless steel.

Industrial door cables
Garage door cables
Where cables are required to run over pulleys
Control cables
General engineering applications
Gym equipment cables
Wind turbine
Wire rope slings
Whip checks
Winch ropes

Nominal Diameter	Approximate Mass	Minimum breaking loads - 1770 Mpa
[mm]	[kg/m]	[kN]
3.0	0.031	4.89
4.0	0.055	8.69
5.0	0.086	13.60
6.0	0.125	19.60
7.0	0.177	26.60
10.0	0.331	54.30
11.0	0.416	65.80
12.0	0.482	78.20
13.0	0.560	91.80
14.0	0.674	106.50
16.0	0.828	139.10
18.0	1.090	176.10
20.0	1.300	217.40
22.0	1.600	263.00
24.0	1.870	313.00
26.0	2.220	367.00
30.0	2.520	489.00
32.0	3.320	556.00
34.0	3.790	628.00
36.0	4.310	704.00
38.0	4.700	785.00
40.0	5.180	869.00

6x7 FC

7x7

6x19 FC

7x19

6x19 Seale FC

6x19 Seale IWRC

6x19 Filler FC

6x19 Filler IWRC

6x31 IWRC

6x36 FC

6x36 IWRC

6x37 FC

6x47 IWRC