Steel Wire Rope - Steel Cable - Wire Rope Fittings

6X36 (14/7+7/7/1) - IWRC Specification

6X36 is a flexible general engineering wire rope readily available in galvanised, unglavanised and marine grade stainless steel. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6X19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6X36 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below:

Wire rope slings
General engineering applications
Crane ropes
Hoist rope
Winch ropes
Holding and closing ropes for grab cranes
Tow ropes
Luffing ropes
Pursing wires
Mooring ropes
Lifeboat falls
Wire rope rigging applications

Nominal Diameter	Approximate Mass	Minimum breaking loads - 1770 Mpa
[mm]	[kg/m]	[kN]
8	0.255	40.3
9	0.322	51.0
10	0.398	63.0
11	0.482	76.2
12	0.573	90.7
13	0.674	106
14	0.802	124
15	0.901	143
16	1.03	161
18	1.34	204
19	1.50	227
20	1.64	259
22	1.95	314
24	2.34	375
25	2.48	396
26	2.74	433
28	3.16	508
29	3.35	544
30	3.60	581
31	3.85	616
32	4.10	658
33	4.39	702
34	4.62	740
35	4.98	794
36	5.16	830
37	5.52	884
38	5.78	933
39	6.18	986
40	6.42	1035
41	6.77	1081
42	7.12	1138
43	7.49	1170
44	7.83	1230
46	8.64	1387
48	9.32	1454
50	10.20	1590
52	11.06	1715
54	11.88	1883
56	12.94	2050
58	13.93	2207
60	14.61	2315

19x7

35x7

32x7

37x7

6x31 FC

6x31 IWRC

6x36 FC

6x36 IWRC

6x19 Seale FC

6x19 Seale IWRC

6x19 Filler FC

6x19 Filler IWRC